BWCXJ - P407, P707, A357, A557
- MSDS: BWCXJ
- Manufacturer: ANITEC IMAGE CORP
- Product Name: P407, P707, A357, A557
- National Stock Number: 6750-00-440-0220
Product Identification
Product ID:P407, P707, A357, A557
MSDS Date:10/01/1989
FSC:6750
NIIN:00-440-0220
MSDS Number: BWCXJ
Responsible Party
BINGHAMTON, NY 13902
US
Emergency Phone: 607-774-3333
Info Phone: 800-234-7707
Cage: 61263
Contractor
Telephone: 607-774-3333
Cage: 61263
Ingredients
>90M POLYESTER SUPPORT
GELATIN
CAS: 9000-70-8
RTECS: LX8580000
SILVER HALIDES, 77783-90-6, 7785-23-1, 7783-96-2
CAS: 7785-23-1
CADMIUM CHLORIDE (SARA III)
CAS: 10108-64-2
RTECS: EV0175000
OSHA PEL 0.2 MG (CD)/M3 DUST
ACGIH TLV: 0.01 MG(CD)/M3; 9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT CONTAINS SMALL AMOUNTS OF
A CADMIUM SALT AND MAY CAUSE LOCALIZED IRRITATION.
Explanation of Carcinogenicity:CADMIUM HAS BEEN DETERMINED TO BE
CARCINOGENIC BASED ON SUBCUTANEOUS ANIMAL LAB STUDIES.
Effects of Overexposure:NONE KNOWN.
Medical Cond Aggravated by Exposure:NONE KNONW.
First Aid
First Aid:REMOVE FROM SOURCE OF EXPOSURE. WASH AFFECTED AREAS
THOROUGHLY. IF IRRITATION OR OTHER CONDITIONS PERSISTS, CONSULT A
PHYSICIAN.
Fire Fighting
Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER MIST, ALCOHOL FOAM, CARBON DIOXIDE, DRY
CHEMICAL.
Fire Fighting Procedures:AVOID BREATHING COMBUSTIBLE FUMES.
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:DISPOSE OF MATERIAL AS NOTED BELOW. UNEXPOSED
FILM MAY BE REPACKAGED FOR FUTURE USE.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE, AWAY FROM
HEAT, RADIATION OR LIGHT SOURCES.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NA
Ventilation:NA
Protective Gloves:DISPOSAL COTTON GLOVES RECOMMENDED
Eye Protection:NA
Other Protective Equipment:NA
Work Hygienic Practices:WASH HANDS AFTER HANDLING FILM AND/OR FOLLOWING
EXPOSURE TO FILM PROCESSING SOLUTIONS.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:NA
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:ESSENTAILLY INSOLUBE
Appearance and Odor:GREY EMULSION COATED FILM WITH NO DISTINGUISHING
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT IMMERSE IN WATER OR CHEMICALS PRIOR TO PROCESSING.
Stability Condition to Avoid:AVOID EXTREME EXPOSURE TO HEAT, LIGHT AND
OTHER RADIATION SOURCES EXCEPT AS NECESSARY TO PROCESS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSAL OF FILM AND FILM PROCESSING SOLUTIONS
SHOULD BE MADE IN CONFORMANCE WITH APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.